The MeiLong 3x3 Timer Cube is a new way to keep track of your times! This puzzle has a timer built right in to a corner piece! Simply hold down the button on the white face of the white/red/green corner until it says zero, then let go and start solving. When you are finished, push that button again and your time will be displayed.
Simple to use
1 button to start and stop, avoiding press wrong buttons.
Instructions:
Press 5 seconds to power on, press 3 seconds to start the timer, press again to stop. The timer will be powered off automatically when standby over 2 minutes.
Accurate timer
1.High precision chip inside makes the timer accuracy to 0.01 second.
2.clear display 2. accurate to 0.01 second
*The timer screen is on a random color face
Replaceable piece
The timer corner piece can be replaced with a regular one, to make the cube normal.
Considerable accessories
Attached screwdriver, replaceable corner piece, spare batteries.
timer cube*1, screwdriver*1, replaceable corner piece*1, cell batteries*2, 3x3 manual*1.
Professional mechanism
Professional mechanism provides the cube a stable turning.
Frosted Surface
Frosted surface brings a good hand feel and avoids scratches on stickerless cubes.
Unique stickerless design
Stickerless Available
Stickerless shade makes the cube more colorful, providing a long lifespan to the cube.
Details display
Tension adjustment。
Adjust the tension freely to meet your demand.
Smooth hand feel
The turning is smooth with no lock-ups, making the cube has a good performance.
How to install Meilong Timing Cube component
1. Remove the screws and pull out the battery compartment
2. Put into the battery
3. Put back the battery compartment and lock the screws
4. Slightly loosen the center screw
5. Remove the usual cube corner, replace the timing component
6. Put back the cube corner, adjust the screw.
Note: This puzzle comes as a standard MeiLong 3x3 with the corner timer piece, a screwdriver, and two small batteries in the box. Remove the screw from the timer piece and disassemble to insert batteries. Reassemble the corner, then replace the standard white/red/green corner with the timer piece to start playing.